Synthesis and Mechanical Characterization of Aluminium Based MMC with SiC as Reinforcement
J.V.Mohanachari, P.Habeebulla, C.Subhahan Basha, B.S.Baba Fakriddin
Corresponding Author : J.V.Mohanachari
Department of Mechanical Engineering, Jawaharlal Nehru Technological University, Ananthapuramu, Andhra Predesh, INDIA.
Email ID : Mohan.firstname.lastname@example.org
Received : 2017-10-29 Accepted : 2017-12-10 Published : 2017-12-10
Abstract : Aluminium based metal matrix composites are playing a vital role in almost all areas automobile, aerospace ,agriculture and all other industrial applications why because their higher strength ,lower density and better wear resistive capability when compared with other materials. In the present work aluminium metal matrix composites are prepared by stir casting route which is the best way among all casting techniques. The reinforcement used in this work is silicon carbide (SiC) with different proportions. AMCâ€™s are prepared by varying the SiC weight in the percentage of 0,4,8, and 16%. After that tensile test and hardness test are performed on the specimen the results shown that with increase of SiC Concentration the Hardness and tensile strengths were increased and 16% SiC specimen has maximum tensile strength and hardness.
Keywords : Aluminium, SiC, Stir casting, UTM ROCKWELL HARDNESS TESTER, tensile Strength, and Hardness
Citation : J.V.Mohanachari et al. (2017) Synthesis and Mechanical Characterization of Aluminium Based MMC with SiC as Reinforcement, J. of Advancement in Engineering and Technology, V5I4 DOI : 10.5281/zenodo.1118134
Copyright : © 2017 J.V.Mohanachari. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Journal of Advancement in Engineering and Technology
ISSN : 2348-2931
Volume 5 / Issue 4
ScienceQ Publishing GroupDownload Article