Structural and Free Vibration Analysis of Stiffened Plate with Different Materials
J.V. Mohanachari,D.Mohana Krishnudu, P.Hussain, Dr. S. Sudhakar Babu
Corresponding Author : J.V. Mohanachari,
AVR&SVR Engg,.College, Nannur,Kurnool. India.
Email ID : Mohan.firstname.lastname@example.org
Received : 2015-04-06 Accepted : 2015-05-08 Published : 2015-05-08
Abstract : In the current era the expanding interest of fundamentally productive and essentially exemplary quality to weight proportion are for the most part served by hardened plates. These basic components are characterized as the plates fortified by Stiffeners or set of bars or ribs one or both sides of the plate. So Stiffened plates are comprised of plate components, to which for the most part load is connected, and shaft components situated at discrete dispersionâ€™s in one or both headings. The present investigation manages limited component examination of Stiffened plate by different Materials. The current investigation covering structural and modal analysis of stiffened plate with steel, Unidirectional Composite material as Single ply and laminated composite material with 5 plies. The Finite element Analysis is carried by using FEM Solver Optistruct which is inbuilt in Hypermesh.Optimization of results carried out to match the stiffness and natural frequencies with steel to substitute it.
Keywords : Mode shape, Composite, Stiffened plate, FEA.
Citation : J.V. Mohanachari et al.,(2015). Effects of Catalyst Variation on Biodiesel Yield. J. of Advancement in Engineering and Technology. V3I1. DOI : 10.5281/zenodo.1000378
Copyright : © 2015 J.V. Mohanachari. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Journal of Advancement in Engineering and Technology
ISSN : 2348-2931
Volume 3 / Issue 1
ScienceQ Publishing GroupDownload Article